Tobacco Cutting Machine WT100 is even heavier than RS100.

Used for cutting herbs and tobacco leaves. It produces fine cuts of 0.8 mm. Made in Poland.

The structural parts of the machine are powder coated

• wear parts are made of quality stainless steel

• the cutting rollers are mounted on ball bearings, this ensures long trouble-free operation

For the added convenience it has installed a rotating chute. The chute can be easily turned left or right, so the machine can be used by right or left hand .

Must be attached to a solid flat surface (table).

Machine dimensions: 17 x 15 x 10cm

Weight: 2.6kg

The leaf shredding machine comes with no warranty.  It has been tested at the factory to proper standards.

To ensure the longer lifetime of the machine, please follow these simple rules:

1) Leaves must be dry, never try to shred damp material - it will clog the machine

2) Remove the hard central rib from the leaves - otherwise it will also cause clogging

3) Never force the machine, it must be running easy. If it is stuck, gently turn it back a bit and remove all clogs by hand.

4) Never run more than one leaf through the machine at any time - thick material will cause forcing the machine. 

Caution: Risk of injury. For adults over 18 years old.