Tobacco Cutting Machine RS100 is much heavier and solidly built than M08.
Used for cutting herbs and tobacco leaves. It produces fine cuts of 0.7 mm. Very popular in Europe.
It is equipped with sealed bearings and new ultra thin 0.7mm cutting rollers and combs .
For the added convenience it has installed a rotating chute. The chute can be easily turned left or right, so the machine can be used by right or left hand .
Ergonomic cutting rollers are 10 cm wide and have anti-roll system. Cutting rollers are made of the highest quality stainless steel - most expensive, but with extraordinary resistance to damage for longer life. Adjustable combs are also made of stainless steel.
Must be attached to a solid flat surface (table).
Machine dimensions: 15 x 14 x 8cm (6" x 5" x 3")
The leaf shredding machine comes with no warranty. It has been tested at the factory to proper standards.
To ensure the longer lifetime of the machine, please follow these simple rules:
1) Leaves must be dry, never try to shred damp material - it will clog the machine
2) Remove the hard central rib from the leaves - otherwise it will also cause clogging
3) Never force the machine, it must be running easy. If it is stuck, gently turn it back a bit and remove all clogs by hand.
4) Never run more than one leaf through the machine at any time - thick material will cause forcing the machine.
Caution: Risk of injury. For adults over 18 years old.